中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 43112-2023 金属材料 弹性模量测定 率跳跃方法(中英文版) Metallic materials - Determination of elastic modulus - Rate jump method |
|||
GB/T 43115-2023 金属材料 薄板和薄带 室温剪切试验方法(中英文版) Metallic materials - Sheet and strip - Room temperature shear test methods |
|||
GB/T 43118-2023 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法(中英文版) Corrosion of metals and alloys Test method for high-temperature corrosion of metallic materials under the action of deposits of salt, ash or other substances |
|||
GB/T 42846-2023 空间环境 非金属材料空间辐射效应地面模拟方法(中英文版) Space environment Ground simulation method of space radiation effects of non-metallic materials |
|||
GB/T 42913-2023 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法(中英文版) Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids |
|||
GB/T 42912-2023 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法(中英文版) Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids |
|||
GB/T 42903-2023 金属材料 蠕变裂纹及蠕变-疲劳裂纹扩展速率测定方法(中英文版) Metallic materials—Method for determination of creep crack and creep-fatigue crack growth rates |
|||
GB/T 42900-2023 金属材料 高应变速率高温压缩试验方法(中英文版) High strain rate and high temperature compression test method for metallic materials |
|||
GB/T 5482-2023 金属材料 动态撕裂试验方法(中英文版) Metallic materials - Dynamic tear test method |
|||
SN/T 5496-2023 金属材料疲劳特性的评价 非线性超声法(中英文版) Evaluation of Fatigue Properties of Metallic Materials Nonlinear Ultrasonic Method |
|||
GB/T 2651-2023 金属材料焊缝破坏性试验 横向拉伸试验(中英文版) Destructive test of welds of metallic materials Transverse tensile test |
|||
GB/T 42617-2023 增材制造 设计 金属材料激光粉末床熔融(中英文版) Additive Manufacturing Design Laser Powder Bed Fusion of Metallic Materials |
|||
GB/T 239.1-2023 金属材料 线材 第1部分:单向扭转试验方法(中英文版) Metallic materials - wire rods - Part 1: Test method for unidirectional torsion |
|||
GB/T 28896-2023 金属材料 焊接接头准静态断裂韧度测定的试验方法(中英文版) Metallic materials - Test method for the determination of quasi-static fracture toughness of welded joints |
|||
GB/T 239.2-2023 金属材料 线材 第2部分:双向扭转试验方法(中英文版) Metallic materials - wire rods - Part 2: Test methods for bidirectional torsion |
|||
GB 4234.9-2023 外科植入物 金属材料 第9部分:锻造高氮不锈钢(中英文版) Surgical implants Metallic materials Part 9: Forged high nitrogen stainless steel |
|||
GB/T 43432.2-2023 金属材料 巴氏硬度试验 第2部分:硬度计的检验与校准(中英文版) Metallic materials - Barcol hardness test - Part 2: Inspection and calibration of hardness testers |
|||
GB/T 43432.3-2023 金属材料 巴氏硬度试验 第3部分:标准硬度块的标定(中英文版) Metallic materials - Barcol hardness test Part 3: Calibration of standard hardness blocks |
|||
YB/T 5293-2022 金属材料顶锻试验方法(中英文版) Test method for upsetting of metallic materials |
|||
GB/T 17394.3-2022 金属材料 里氏硬度试验 第3部分:标准硬度块的标定(中英文版) Metallic materials - Leeb hardness test - Part 3: Calibration of standard hardness blocks |
找到:291條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |